Search:
Products > ProductList > Amplifiers > EXP9
EXP9
Nine-Zone Expander

The EXP9 is a nine zone expansion unit designed to work exclusively with the ZPR68-10 Six Zone Eight Source Remote Preamp. When connected to the ZPR68-10, it allows expansion up to a total of 15 zones.

 

Specifications

Audio (each channel)

  • Gain (@ max VC): Unity
  • Input Overload: > 4 V RMS (@ max VC)
  • Input Impedance: > 40 k Ohms
  • Output Impedance: 470 Ohms
  • Signal to Noise: 98 dB (re 2V out) IEC 'A' weighted
  • THD: (VC -10 dB) 0.01% at 2V input level
  • Frequency Response (± 3 dB): 5 Hz to 70 kHz
  • Bass Control Range (@ 100 Hz): ± 12 dB (in 2 dB steps)
  • Treble Control Range (@ 10 kHz): ± 12 dB (in 2 dB steps)

Video

  • Input/Output Impedance: 75 Ohms
  • Video Insertion Loss: < 1.0 dB (50 Hz to 10 MHz)

General

  • Gold Plated RCA type phono jacks: All A/V inputs/outputs
  • Power Requirements: 14V AC @ 1.4 A (Power supply included)
  • Dimensions: 14" W x 2.5" D x 7 " H (356mm x 63.5mm x 178mm)
  • Weight: 4 lbs. 3 oz. (1.9kg.)

 

Features
  • The features, functions & performance of the zones on the EXP9 are identical in every way to those of the ZPR68-10.
  • The EXP9 is available with one to nine "XCARDs" (zone expansion PCB's), pre-loaded and tested at the factory, or individually for in-field expansion.
  • When received from the factory, unused zone openings are covered from underneath with individual cover plates. These are removed, as needed, when additional zone XCARDs are installed in the field.
  • The EXP9 connects to the ZPR68-10 via two multiconductor ribbon cables (included); a 26-conductor cable and a 50-conductor cable.
  • As with the ZPR68-10, the EXP9 uses a multi-voltage high-current AC power supply (included).
  • Control of all zones is also possible via the COM PORT (RS232 data signal compatible) on the connected ZPR68-10.
  • As with the ZPR68-10, the EXP9 operates with IR commands from the Xantech RC68+ IR Remote/Programmer (available separately). As received from the factory, each zone (as well as the XCARD's) is set to IR Code Group number 68.
  • International versions available. Call for additional information.