The 680-10 is an IR Remote Controlled AC Switcher with six AC outlet receptacles. It responds to RC68+ Programmer IR commands via its IR input port. Each outlet is switched ON or OFF by a high current electromechanical relay for higher reliability than solid state switching methods.

Specifications

• Six AC outlets rated at 120 VAC, 5 Amps each.
• 15 Amps total current rating.
• Includes 15-Amp circuit breaker.
• 14-Gauge heavy duty 3-conductor power cord 5-1/2 feet in length, with a grounded 3-prong plug.
• IR input jack (3.5mm mono mini jack).
• Green LED indicator lights to confirm presence & acceptance of RC68+ IR commands.
• Requires RC68+ Hand Held Programmer.
• Dimensions: 15-1/2" W x 4-1/2" H x 2-3/8" D (394mm x 115mm x 61mm)
• Weight: 4 lbs. 11 oz. (2.15kg.)

Features

• The RC68+ provides separate codes for each outlet for each of the following modes:
  Toggle - The individual AC outlets are toggled ON when the corresponding IR code is sent and OFF when the same code is sent again.
  Pair - Two IR codes are used to control one AC outlet. One code for ON, another for OFF.
  Group - Two IR codes override all individual settings. All AC outlets turn ON with one code and OFF with the other. Note: Toggle or Pair operations for any of the individual outlets will still operate after Group ON is executed.
• Sequential ON commands for each outlet are possible when used in conjunction with learning devices, such as Xantech URC-1 remotes, SmartPads, or the 590 controllers.
• The 680-10 can be set to 55 different IR code groups. The code groups are identified by the numbers & letters that are on the face of each button on the RC68+.