The AC2 is an IR or voltage controlled switched AC outlet. It can be used for AC power management with the control output of the ZPR68-10 or any low voltage source (5-30VDC or AC). Can be controlled by a video signal.

Features

• Maximum switching current: 15A continuous @ 120V AC, 60Hz.
• 1 - 60 second variable on/off delay.
• AC or DC input control jack: 2-terminal Weco type.
• Control voltage range: AC or DC 5-30V, 5mA @ 5V, 30 mA @ 30V.
• Video Input: 2 RCA type jacks (loop-through).
• Also controlled by video signal (NTSC) or Xantech RC68+ codes from a URC or SmartPad.
• Dimensions: 10 1/2" L x 3 1/4" W x 2 1/2" H (267mm x 83mm x 64mm)