The RT8 Router is a ONE-IN/EIGHT-OUT switcher which directs an infrared control signal to any one, or all 8 output ports. The RT8 is similar except it is a ONE IN/EIGHT OUT switcher. Now you can control large groups of TV monitors (or any other A/V product) from control locations using Xantech IR Receivers or SmartPads. Up to 8 devices may be addressed with one RT8. In addition, the "I" and "G" output ports can drive LED indicators placed at each controlled device location so that you can see which devices are being addressed at any given time.

Specifications

• The RT8 respond to Xantech RC68+ Hand Held Programmer codes.
• CODE GROUP NUMBERS - The RT8 is capable of being set to 55 different code groups. The code groups are identified by the numbers and letters that are on the face of each button on the RC68+.
• A 4-terminal plug-in connector, "IR RCVR INPUT", permits connection of all Xantech IR Receivers, Keypads, Controllers, etc.
• A green LED adjacent to the "IR RCVR INPUT" serves as an input signal Test-IR.
• 8 IR "O" and "G" emitter outputs and 8 "I" and "G" indicator outputs are located on eight 4-terminal plug-in connectors.
• The "I" and "G" indicator outputs are current limited to 10 mA, allowing the direct connection of an LED without the need for a current limiting resistor.
• Power Requirements: 12V DC @ 1 Amp.
• Requires one 786-00 Power Supply for each RT8, or up to five RT8's may be powered from one 782-00 Power Supply.
• Requires RC68+ Programmer.
• Dimensions: 9 7/8" W x 2 7/8" H x 1 3/8" D (251mm x 73mm x 35mm)
• Weight: 12 oz. (.3kg.)

Features

• Single Routing - Allows any individually selected port to be driven with an IR control signal separate from the others.
• Group On - In this mode all 8 IR routes are chosen simultaneously with the Group On command. This is useful if you wish to quickly address all IR outputs at the same time.
• Group Off - Turns the IR signal off at all IR outputs regardless of the routing mode chosen.